Mastodon 
Clovises

This page shows a series of Clovises, in various stages of manufacture. They were made for Mastodon State Historic Site, In Imperial, MO. , in November and December, 2009.

(Up-dated 20/April/2012)

HOME

Here's the finished display.

This is Larry's set-up in his basement. The white tarp catches all the debris. When Larry gets done with one of the stages, he gathers the debris from the tarp, then turns the tarp over in preparation for the next stage. He takes pictures of each stage, front and back, some with debitage, and some without. The entire collection was turned over to Mastodon SHS for use in a new exhibit. Notice the stop/clock to the left of Larry's chair. That's to provide accurate times for each individual stage, for each biface.

 

 Biface spall #1 front view, weight= 1 lb. 11 oz. 

    Biface #1, stage 1, front view8 minutes, 36 seconds14.3 cm. (5-9/16 in) X 6.6 cm. (3-1/16 in.) weight 10 oz.
Tools: SS abrader, hammerstone, antler billet  

  Biface #1, stage 2, front view, with debitage  28 minutes, 28 seconds  Total= 37 minutes, 4 seconds  14.0 cm. (5-7/16 in.) X 4.6 cm. (1-13/16 in.)
weight= 5 oz  Tools: SS abrader, hammerstone, antler billet

Biface #1, stage 3, front view, with debitage  20 minutes, 50 seconds  Total= 57 minutes and 54 seconds
13.1 cm. (5-1/16 in.) X 4.3 cm. (1-1/16 in) 2nd Flute set up =3 minutes 12 seconds  Grand total = 1 hour, 1 minute, 6 seconds
Tools: SS abrader, hammerstone, antler billet


Biface spall #1, back view  weight= 1 lb. 11 oz.

    Biface #1, stage 1, back view  8 minutes, 36 seconds  14.3 cm. (5-9/16 in) X 6.6 cm. (3-1/16 in.)
weight= 10 oz.  Tools: SS abrader, hammerstone, antler billet

   Biface #1, stage2, back view, with debitage  28 minutes, 28 seconds  Total= 37 minutes, 4 seconds  14.0 cm. (5-7/16 in.) X 4.6 cm. (1-13/16 in.)  weight= 5 oz  Tools: SS abrader, hammerstone, antler billet

    Biface #1, stage 3, back view, with debitage  20 minutes, 50 seconds  Total= 57 minutes and 54 seconds  13.1 cm. (5-1/16 in.) X 4.3 cm. (1-1/16 in)   2nde Flute set up =3 minutes 12 seconds  Grand total = 1 hour, 1 minute, 6 seconds  Tools: SS abrader, hammerstone, antler billet


Biface #2, spall front view,  weight 3lbs.-1 oz.,  18 cm. (7-1/16 in.) X 12.7 cm. (5 in.)

     Biface #2, stage 1, front view,  10 minutes, 46 seconds,  13.2 cm. (5-1/4 in.) X 7.4 cm. (2-7/8 in.),  weight= 7 oz.
Tools: SS abrader, hammerstone, antler billet

    Biface #2, stage 2, front view,  15 minutes 25 seconds,  Total= 26 minutes 11 seconds,  10.8 cm. (4-5/16 in.X 5.8 cm (2-1/4 in.)
weight= 5 oz.

Tools: SS abrader, hammerstone, antler billet

Biface #2, stage 3, front view  28 minutes, 35 seconds   Total= 54 minutes, 46 seconds  9.8 cm. (4-5/16 in.) X 4 cm. (1-5/8 in.)
weight= 3 oz.
Tools: SS abrader, hammerstone, antler billet

Biface #2, stage 4, front view, with flute flake,  53 seconds,  Total= 55 minutes, 39 second,  9.8 cm. (3-7/8 in.) X 4.0 cm. (1-9/16 in.)
weight= 2-1/2 oz
Tools: SS abrader, hammerstone, antler billet, antler flaker


 

Biface #2, spall, back view  weight 3lbs.-1 oz.  18 cm. (7-1/16 in.) X 12.7 cm. (5 in.)

   Biface #2, stage 1, back view  10 minutes, 46 seconds  13.2 cm. (5-1/4 in.) X 7.4 cm. (2-7/8 in.)
weight= 7 oz.  Tools: SS abrader, hammerstone, antler billet

  Biface #2, stage 2, back view,  15 minutes 25 seconds,  Total= 26 minutes 11 seconds,  10.8 cm. (4-5/16 in.X 5.8 cm (2-1/4 in.)
weight= 5 oz.,  Tools: SS abrader, hammerstone, antler billet

      Biface #2, stage 3, back view,  28 minutes, 35 seconds,  Total= 54 minutes, 46 seconds,  9.8 cm. (4-5/16 in.) X 4 cm. (1-5/8 in.)
weight= 3 oz,.  Tools: SS abrader, hammerstone, antler billet,antler flaker

Biface #2, stage 4, back view, with flute flake  53 seconds  Total= 55 minutes, 39 seconds  9.8 cm. (3-7/8 in.) X 4.0 cm. (1-9/16 in.)
weight= 2-1/2 oz  Tools: SS abrader, hammerstone, antler billet, antler flaker

 


To MASTODON CLOVISES Page 2